Monthly Archives: August 2016

Finding Floor Tile Design Ideas

While wooden flooring or carpet tiles are a good choice of flooring for a living room, linoleum is one of the most recommended options for the kitchen. Stone and carpet are good choices for the bedroom flooring, while the use of ceramic tiles is well-suited for bathrooms. There are some basic criteria to be considered while choosing floor tiles for any room.
The choice of flooring for bathrooms and the kitchen should be based on factors like resistance to stains, water, and the ease of cleaning. Aesthetics and comfort are of prime importance when choosing floor tiles for the living room or the bedroom. Bright colors can be used in the kids’ bedroom, thus adding vibrancy to the room. Cool and soothing colors are better-suited for the master’s bedroom, where comfort and elegance are of importance.
Floor Tile Design Ideas for Different Rooms
How do the floor tiles in your room look? Do they look old and tired? Perhaps, you have been walking over them for quite some time now and they need replacement. You must think of installing new floor tiles and give a new look to your rooms. Here are some floor tile design ideas for the different rooms of your house.
Living Room
Usually, your living room is the area where people get together. In some homes, the living area serves as a formal reception room while in others, it is treated like a family room. It is the face of your house and so, it should reflect your personality, taste, and social status. Wood flooring is a good option for the living area. You can also think of laying carpet tiles or ceramic floor tiles in the living area. Be it any kind of flooring, the tiles should be of muted colors and not appear very glossy.

Kitchen
Some of the points to consider in choosing floor tiles for a kitchen are ease of cleaning, stain-resistance and durability. You should also remember that most of the work in a kitchen is done standing and the kitchen is one of the most-visited areas in the house. So the kitchen floor tiles should give you that comfort of walking.

Linoleum and bamboo floor tiles are a cost-effective option for kitchen floor tiles. Linoleum tiles are available in a wide variety of styles, designs, and textures and are easy to install. Bamboo flooring tiles give the room a stylish look and make a durable and environment-friendly floor tile design idea. There is a wide range of ceramic tile design ideas for kitchens. Decorative and artistically painted ceramic tiles look great, but they can be hard on the legs and cold underfoot.

Bedroom
A bedroom is your place to retire after a tiring day. It is where you cuddle up for a good night’s sleep or an afternoon nap. Hence, coziness is of utmost importance, when it comes to designing your bedroom.

Natural stone tile designs are a good choice for your bedroom floor. Stone tiles are available in different colors and designs and they give the bedroom a luxurious look. You can mix and match the tiles to create a unique floor tile design for your bedroom. Carpet tiles available in many colors and patterns are also a great option for bedroom floor tile designs. If it is about laying flooring in the children’s room, you can have some bright-colored floor tiles installed. They will add to the cheer in the kids’ room.

Bathroom
Bathroom floor tile design ideas have a direct impact on the appearance of the bathroom interiors and the maintenance your bathroom flooring needs. Resistance to water and stains are of prime importance in case of bathroom floor tiles.

While choosing bathroom floor tile designs, you can go for decorative tiles with floral patterns or ceramic tiles that blend well with the fixtures and furnishings in the bathroom. You can choose solid colored ceramic tiles and add different colored tile borders, or choose a grout color that contrasts the tile color, thus creating an interesting floor tile design. Bright-colored tiles with graphics will give the bathroom a contemporary look, while soft colors will give it a romantic appeal. Terra cotta and hand-painted tiles can be used to give a Mediterranean look to your bathroom.
Ceramic Tiles – A Yes for any Room!
Ceramic is quite a popular material in flooring. The many user-friendly features that ceramic offers, is the reason behind its popularity as a floor material. It requires no ceramic tile dealer to tell you that ceramic tile flooring is cost-effective and almost maintenance-free, and that it gives you a wide range of designs to choose from. Yes, ease of maintenance and cost-effectiveness are the striking features of ceramic floor tile designs. All these tiles require, is regular cleaning, and they are cost-effective in the sense that their installation costs are higher, but maintenance costs are almost nil. Also, ceramic tiles suit almost all kinds of home interiors; they look just as good in any area of the house. Moreover, installing them is hassle-free. Doing the ceramic tile installation by yourself is not very difficult, and thanks to the variety in these floor tile designs, you can be flexible in choosing the one that suits your home best. So, if you are planning to install ceramic tiles in your house, don’t think much; just bring your ceramic floor tile design ideas into reality.
Come to think of it, flooring is an integral part of your house and floor tile designs, a vital component of interior designing. Floor tiles bear the weight of all the furniture in your house. They tolerate your ‘stampede’ without uttering a word. All you can do is care for them, give them the treatment they deserve, and grant them the right to look beautiful. And that you can do, with the use of some good floor tile design ideas.

Ways to Install Laminate Flooring in Your Bathroom

However, there are waterproof laminates available in home improvement stores which can be installed in bathrooms. There are a number of advantages associated with this type of flooring. It is made of an environment friendly material which is highly durable, and its cleaning and maintenance is not a big hassle at all.

As you know, waterproof laminates are to be selected for bathrooms. Take measurements of the bathroom and calculate the exact quantity of laminates needed. You also have to buy rubber underlay pads, nails, hammer, crow bar, power saw, rubber mallet, utility knife, etc. When you have procured all these necessary items, follow the installation instructions elaborated in the following Buzzle passages.

The Installation Process

Step #1: The first step is preparation of the work area. The best part of this flooring is that it can be laid on any type of surface, provided that the floor condition is good and is properly leveled. Remove the baseboards from walls, clean the floor, and check for any defects. If any damage is detected, it should be repaired before laying the floor. While working in bathroom, you have to disconnect the water supply, remove the toilet, and cover up the drains.

Step #2: Prior to installation, you must go for a dry run. Here, you will place the laminate board on the floor to get an idea how to cover up the floor. This is done because there are bathroom fixtures where you cannot fit in a whole plank. For them to fit in such areas, you need to cut the planks using a power saw.

Step #3: Place a moisture barrier sheet on the bathroom floor. Secure it along the edges so that it does not get displaced. Now, lay the rubber underlay pads over the plastic sheet. Generally, manufacturers provide instructions about installation of underlay pads and you have to follow the same. You have to cut holes on this pad when you are laying it around toilet flange and other such areas of the bathroom.

Step #4: Start installing laminate flooring in bathroom from any one corner. Place the first board one-fourth inch away from the bathroom wall. This is an expansion gap which has to be maintained along all the edges of the flooring. In order to keep the gaps uniform, you can use tile spacers. Lay the next board in such a way that the top edges of both the boards touch each other. Then take a rubber mallet and tap it gently so that the two planks get interlocked. Use the same technique to lay the remaining boards. You have to install the specially cut planks of laminate flooring around the toilet flange and other such areas in the same way, but in a very carefully. When you reach the opposite end of the wall, lay the last board with great care. A crowbar will be helpful in setting in the last plank on the bathroom floor.

Step #5: Apply a layer of silicone sealant on the border lines of two adjacent laminate boards. This is done to ensure that water does not seep below the laminate through these edges. You should also seal up the areas where bathroom fixtures are located. Finally, fix up the baseboards on the walls, so that the expansion gaps of the newly installed laminate floor gets covered up.

Laminate flooring adds so much beauty and warmth to a bathroom which tiles or any other material cannot give. Moreover, the cost is not very high. Therefore, you can improve the décor without spending a huge sum of money.

Choosing Bathroom Floor Tile Design

A bathroom is a stress-free zone, a place where you can relax by taking a warm shower or a luxurious bubble bath. Earlier, for changing the decor, there were not many choices available. However, now there are infinite choices as per your taste and personality. Perhaps, the most crucial choice are the tile patterns. Good designs can accentuate the theme of the place, for example, if you want your bathroom to have a contemporary look, having tiles with plain backgrounds and bright-colored shapes and graphics is an excellent option.

The important characteristics of a good tile is that it should not only look good, but also be safe to walk on and easy to maintain.

Materials and Designs
There are several ideas to choose from, but it’s important to understand what suits your needs the best.

Glazed Ceramic: Due to its durability and maintenance-free qualities, ceramic is one of the best choices. It has a natural stone look. Moreover, they are available in various different colors, shapes, and textures to suit your decor and theme. Make sure that the surface has a slip-resistant finish so that it is safe to walk on when wet.

Porcelain: Porcelain tiles are made of white clay. One of the easiest to maintain, they are stain and wear resistant as they are fired at very high temperatures. Cleaning porcelain is extremely easy, and this is perfect for someone who has no time on their hands. Since they have a white base, various colors can be added according to your theme. They are inexpensive and are very popular in residential and commercial complexes.

Natural Stones: Natural stones are manufactured from granite, limestone, basalt, marble, and slate. They are exquisitely beautiful, but like all beautiful things, they are expensive and high in maintenance. Another thing that has to be considered is that unlike porcelain and ceramic tiles, these are heavy and you have to check whether the floor will be able to take its weight.

Terracotta: These tiles are also made from fired clay and are specifically made in countries like Mexico, France, Italy, and Spain. Terracotta is available in different colors and shapes. They can be machine-made or handmade. Terracotta is beautiful in the natural state, however due to its porous nature, the tiles are required to be sealed. Though it is a bit complex to install them, they are easy to maintain, durable, warm, and inviting.

Mosaics: These are incredibly versatile tiles available in a variety of colors. They have geometric designs bedded in small cubes which give them a delicate look. Though they can be used on floors of any size, they look best when used on a smaller size space. Besides being durable and low in maintenance, they are also less slippery as compared to the other options.

Cork: Cork is another option, among the many bathroom floor tile design ideas. Though cork can be used over any flooring, it is best used in the bathroom. It is environmentally friendly, anti-static, shock-absorbent, and non-slippery even when wet. Cork can be used unsealed, but it is better to have it sealed to prevent dirt from ingraining itself.

Designing Tips
Here is a look at some design options, to come up with the right look for your bathroom.

Choosing the right tile color is very important. Neutral colors like beige and white make the place look larger and reflect light. Colors like yellow, peach, and even green make the bathroom look more cozy and inviting. These colors are however not meant for a contemporary look, but are more appropriate for a country look. Colors like blue and violet reflect a calm atmosphere. Choosing bright colors makes the bathroom seem smaller.

If you want a contemporary look, choose those with a plain white or black base and add different colors and graphics. Play with eye-catching colors like red, blue, yellow, and green. You can complete the look with contemporary accessories and fixtures.

It is not always necessary to lay the tiles in the same simple pattern. For a unique look, try a diagonal layout or one alternating between two kinds of tiles. You have to use your creativity to come up with a look that suits your theme and taste.

If you are using a single color, try adding a different color border to make it more interesting. You can also alternate between two colors for the border. This kind of look displays your creativity and your ability to play with colors.

For a Victorian look, use pastel shades like pink and green with floral patterns. If you want more of a nature-based Mediterranean look, use terracotta or hand-painted tiles.

Floors represent the largest area in any room, so there is a significant investment of money and effort in selecting the tiles. Therefore, it’s important to get it right. There are innumerable bathroom floor tile design ideas. You can change the fixtures or accessories as often as you want, but the flooring lasts for a long time. If you are not sure about the design, then it is best to leave it to the professionals.

Choosing Effective Architectural Services

Do you need quality Architectural Drafting Solutions at most competitive rates?

Architectural Drafting India has delivered over 200 projects and 100 plus satisfied clients to both developed and developing countries like from the U.S to Europe, from Australia to Singapore, from developing Africa to flourishing economies like India.

You will receive quotes and response from Architectural Drafting India within hours in any corner of the world. You just click the mouse and we are there at your architectural drafting services  as it includes architects, civil engineers, 3d modelers and visual artists with the passage of time, We have learnt that architectural is an as an art and not a science. Designs differ from country to country, culture to culture and from architect to client but you can depend upon us in the design process.

We are professional architectural firm providing quality solutions for all architectural phases since last 5+ years.

You can save up to 70% on all over cost by outsourcing architectural drafting projects to us.

We Provide Architectural Drafting Services like architectural home plan, building and structural design, architectural design, drawing, lighting plans, cost estimations, layering elevation and sections, cost estimations, layering, architectural home plan design, architectural rendering and 3D Modeling etc.

Our architectural services and architectural drafting services include:

* Architectural Drafting
* Floor & Roof Plans
* Elevations
* Section Views
* Interior Detailing
* Land Scalping
* Library Creation
* Typical Detail Creation
* Hand Sketch to CAD/Concept Plans to CAD

Architectural Drating Sample

 

We provide services to various offshore architectural firms, interior designers, building contractors and CADD solutions provider. Our clientele spans UK, Australia, USA and other European countries. We have always provides flexible pricing system with maximum transparency for clients.